| |
| |
  |
 |
| 51MXY |
TWO
AXIS ("X" AND "Y")
5-POSITION,
SINGLE POLE
MOMENTARY CONTACT SWITCH |
|
| 51DXY |
TWO
AXIS ("X" AND "Y")
5-POSITION,
SINGLE POLE
MOMENTARY CONTACT SWITCH |
|
 |
|
FEATURES
• Pin or Turret Type Terminals.
• Dust Cover.
• Miniature Packaging.
• Snap Acting.
• Provision For Panel Mounting.
• Phenolic or Diallyl Phthalate Case. |
FEATURES
• Pin or Turret Type Terminals.
• Dust Cover.
• Miniature Packaging.
• Snap Acting.
• Provision For Panel Mounting.
• Phenolic or Diallyl Phthalate Case. |
OPERATION
51MXY is a five-position, single-pole, momentary
contact switch. Referring to the vector diagram above,
actuation of any one of the four switches, X1 , X2 , Y1,
Y2, is accomplished by deflection of the operating handle
in the desired direction along the "X" or "Y" axis. Internal
guides prevent the simultaneous actuation of more than
one switch. Release of the operating handle automatically
returns it to the "OFF" position. Note! The actuation
axes, "X" and "Y", are inclined at an angle of 45° to
the switch case axis. |
OPERATION
51DXY is a five-position, single-pole, maintained
contact switch. Referring to the vector diagram above,
actuation of any one of the four switches, X1, X2, Y1,
Y2, is accomplished by deflection of the operating handle
in the desired direction along the "X" or "Y" axis. Internal
guides prevent the simultaneous actuation of more than
one switch. When the operating handle is released, the
switch remains in the actuated mode until the handle is
manually reset to the "OFF" position. Note! The
actuation axes, "X" and "Y", are inclined at an angle
of 45° to the switch case axis. |
|
| 91MXY |
TWO
AXIS ("X" AND "Y")
9-POSITION, SINGLE POLE
MOMENTARY CONTACT SWITCH |
|
| 91MDXY |
TWO
AXIS ("X" AND "Y")
9-POSITION, SINGLE POLE
MOMENTARY/MAINTAINED |
|
| 91DMXY |
TWO
AXIS ("X" AND "Y")
9-POSITION, SINGLE POLE
MOMENTARY/MAINTAINED |
|
FEATURES
| • |
Pin
or Turret Type Terminals. |
| • |
Dust
Cover. |
| • |
Miniature
Packaging. |
| • |
Snap
Acting. |
| • |
Provision
For Panel Mounting. |
| • |
Phenolic
or Diallyl Phthalate Case. |
|
FEATURES
| • |
Pin
or Turret Type Terminals. |
| • |
Dust
Cover. |
| • |
Miniature
Packaging. |
| • |
Snap
Acting. |
| • |
Provision
For Panel Mounting. |
| • |
Phenolic
or Diallyl Phthalate Case. |
|
FEATURES
| • |
Pin
or Turret Type Terminals. |
| • |
Dust
Cover. |
| • |
Miniature
Packaging. |
| • |
Snap
Acting. |
| • |
Provision
For Panel Mounting. |
| • |
Phenolic
or Diallyl Phthalate Case. |
|
OPERATION
91MXY is a nine-position, single-pole, momentary contact
switch. Referring to the vector diagram above, actuation of any
one of the four inboard switches, X1, X3, Y1, Y3, is accomplished
by deflection of the operating handle a short distance along the
desired axis. Full range deflection of the operating handle in
either direction, along either axis, actuates both of the switches
common to that axis. Internal guides prevent the simultaneous
actuation of more than one bank of switches. Release of the operating
handle automatically returns it to the "OFF" position. |
OPERATION
91MDXY is a nine-position, single-pole, momentary/
maintained contact switch. Referring to the vector diagram above,
actuation of any one of the four inboard switches, X1, X3, Y1,
Y3, is accomplished by deflection of the operating handle a short
distance along the desired axis. If the operating handle is released
at this point, it returns automatically to the "OFF" position.
Full range deflection of the handle in either direction, along
either axis, actuates both switches common to that axis. Switch
contacts of both the actuated switches are maintained with the
handle set in any of the outboard positions, and remain so until
the handle is manually reset to the "OFF" position. |
OPERATION
91DMXY is a nine-position, single-pole, maintained/
momentary contact switch. Referring to the accompanying vector
diagram, actuation of any one of the four inboard switches, X1,
X3, Y1, Y3, is accomplished by deflection of the operating handle
a short distance along the desired axis. If the handle is released
at this point, it remains in position and the inboard switch contacts
are maintained. Full range deflection along the selected axis
actuates the corresponding outboard switch, while the previously
actuated inboard switch remains actuated. Releasing the handle
at any of the outboard positions returns it automatically to the
corresponding inboard position. From any inboard position, the
handle must be returned manually to the "OFF" position. |
Please
contact our representatives with your questions
and needs.
|
|
